BigEasy rigs are conceptual AC VFD drilling rigs jointly developed by SJ Petroleum with LOADMASTER (USA), featuring special module, trailers-mounted structure and fast transportation without the use of crane.
Benefits:
- Drawworks, substructure, supporting seat, mast, power skid and other pars are trailers-mounted, thus are easily assembled and installed at site.
- The mast raised by hydraulic cylinder can be divided into three sections where foundation is connected by pin and upper as well as middle sections are extended and retracted mechanically
- Paralellogram substructure can be folded into pieces thus minimizing floor space
- The drilling rig can installed at well site only by the use of six trailers without the use of crane, which makes the installation very convenient
- Low-position installed VFD drawworks system
- Integral instrumentation and control, centralized at drillers console
Model |
ZJ50/3150D(BE770) |
ZJ40/2250D(BE550) |
Drilling depth (4-1/2" DP), m (ft) |
5000 (16400) |
4000 (13200) |
Max. hook load, kN (ft) |
3430 (770000) |
2450 (550000) |
Max. hook speed (10 lines), m/sec (ft/sec) |
0.23-1.5 (0.75-4.92) |
0.25-1.64 (0.82-5.38) |
Drill line dia., mm (in) |
Ф35 (1.38") / Ф32 (1.26") |
Ф32 (1.26") |
Diesel egine, kW (hp) (1300 r/min) |
816 x 3 (1110 x 3) |
773 x 3 (1050 x 3) |
Drawworks hp, kW (hp) |
1100 (1500) |
735 (1000) |
Drawworks speed |
Infinitely variable, one gear |
|
Braking type |
Hydraulic disk brake |
|
Mast type |
K type |
|
Mast effective height, m (ft) |
41.5 (136) |
|
Capacity of monkey board, m (ft) (5" DP) |
5000 (16400) |
4000 (13120) |
Hight substructure / clear height under rotary beam, m (ft) |
8 / 6.7 (26 / 22) |
6.7 / 5.4 (22 / 18) |
Floor area, м2 (фут2) |
9.9 x 11 (32.5 x 36) |
|
Setback capacity, m (ft) |
5000 (16400) |
4000 (13120) |
Load of rotary beam, kN (lb) |
3430 (770000) |
2450 (550000) |
Load of setback box, kN (lb) |
2000 (440000) |
1260 (280000) |
Voltage |
24V / 220V / 380V / 690V (Chinese standard) |
|
Rotary table model / open, mm (in) |
ZР275 / Ф700 (Ф27.5") |
|
Max. working SPM of rotary table, r/min |
300 |
|
Traveling block model |
YG350 |
YC250 |
Mud pump |
F-1300 x 2 / F-1600 x 2 |
F-1300 x 2 |
Mud. pump pressure, MPa (psi) |
35 (5000) |
35 (5000) |
Max. displacement |
38.78L/S x 2 |
38.78L/S x 2 |